HealthRider H80t Treadmill English Manual - Page 7
Aassembly
View all HealthRider H80t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To hire an authorized service technician to assemble your exercise equipment, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • The underside of the walking belt is coated with high-performance lubricant. After shipping, there may be some lubricant on top of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys one adjustable wrench one Phillips screwdriver scissors needlenose pliers To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. 1 Attach the Left Wheel Cap (92) to the Base (91) with two #8 x 3/4" Screws (2). Attach the Right Wheel Cap (not shown) to the right side of the Base (91) in the same way. 2. Pull the Upright Wire (77) and the ground wire (A) through the indicated hole in the Base (91). 2 Attach the ground wire (A) to the Base (91) with a #8 x 1/2" Ground Screw (10). Press the Grommet (75) into the square hole in the Base (91). 91 2 92 75 Hole 77 A 10 91 7