HealthRider Health Rider Hr2 English Manual - Page 6
Tighten all three Button Screws.
View all HealthRider Health Rider Hr2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. Have a second person hold the Pedal Frame 4 (5) in the position shown. 48 Attach the Pedal Frame (5) to the Pivot Frame (6) with an M10 x 54mm Button Screw (48), an M10 Split Washer (57), and an M10 Curved Washer (59). Do not tighten the Button Screw yet. 6 48 59 Then, attach the Pedal Frame (5) with two M10 x 54mm Button Screws (48), two M10 Curved Washers (59), and two M10 Locknuts (52). Tighten all three Button Screws. 52 5 59 57 48 5. Orient the Handlebar (7) as shown. 5 Slide the Handlebar Sleeve (31) downward until the tab on the Handlebar Sleeve covers the indicated hole in the Handlebar (7). Loosen and remove the Handlebar Knob (28). Press the tab on the Handlebar Sleeve (31) and insert the Handlebar (7) and the Handlebar Sleeve into the Frame (1); make sure that the tab on the Handlebar Sleeve is in the indicated slot in the Frame. Slide the Handlebar (7) upward or downward to the desired height, and tighten the Handlebar Knob (28) into the Frame (1) and an adjustment hole in the Handlebar. Make sure that the Handlebar Knob is engaged in an adjustment hole in the Handlebar. 31 28 1 7 Tab Hole Slot 7