HealthRider Hetl13914 Instruction Manual - Page 16
Lower the Frame 56 see HOW TO LOWER, Press the Left and Right Base Covers 82
View all HealthRider Hetl13914 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
18. Attach the upper end of the Storage Latch (53) to the bracket on the Latch Crossbar (38) with an 18 M8 x 50mm Bolt (3) and an M8 Nut (12). Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 28). 56 12 38 3 53 19. Firmly tighten the six 3/8" x 4" Screws (7) (only one side is shown). Press the Left and Right Base Covers (82, 83) onto the Base (94). 19 82 83 7 94 20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31). Note: Extra parts may be included. 16