HealthRider Hetl13914 Instruction Manual - Page 26

HOW TO USE THE SOUND SYSTEM THE SETTINGS MODE To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. The console features a settings mode that keeps track of treadmill information and allows you to personalize console settings. 1. Select the settings mode. To select the settings mode, press the Settings button. When the settings mode is selected, the following information will be shown: The time display will show the total number of hours that the treadmill has been used. The distance display will show the total number of kilometers or miles that the walking belt has moved. If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console. The lower section of the display will show the status of an iFit module. If an iFit module is connected, the display will show the words WIFI MODULE. If a USB module is connected, the display will show the words USB/SD MODULE. If no module is connected, the display will show the words NO IFIT MODULE. 2. Select the optional screens. While the settings mode is selected, the matrix will display several optional screens. Press the decrease button next to the Home button to select each of the following screens:  UNITS-To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. 26