HP 10642 Best practices for HP 10000 Series and HP 10000 G2 Series Racks - Page 8
Certification and regulatory compliance - g2 enclosure rack
View all HP 10642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Additional Resources Additional resources are available as follows: • For a complete list of HP rack options and accessories, go to the main rack page at www.hp.com/products/racks or to the main rack options page at www.hp.com/products/rackoptions. • For a list of ProLiant servers and options, go to www.hp.com/products/proliant. • For a list of HP power products such as UPS and PDU, go to www.hp.com/products/ups. • For a complete list of HP server storage equipment, go to www.hp.com/products/serverstorage. Certification and regulatory compliance Product certification The10000 and 10000 G2 Series racks are defined as non-functional mechanical storage bays and therefore, are not certified individually as a stand-alone product. The rack does not serve as an overall safety or EMI rated enclosure nor does it carry any other Agency compliant rating. However, any product intended for use in an HP rack should be individually certified as a stand-alone product. For example, HP Power Distribution products, such as uninterruptible power supplies (UPSs) and power distribution units (PDUs) are fully certified as stand-alone products. Certain third-party products may not be fully certified as stand-alone products. Any product that does not meet stand-alone certification is not included in any HP-specified rack configuration and should not be installed in an HP rack. HP General Specification for Environment compliance HP General Specification for Environment (GSE) specifications prohibit or restrict the use of certain chemical compounds in products or in the manufacture of products. HP complies with the GSE specifications and restricts the use of these compounds in the development or manufacture of any HP product (including third-party supplier product). Information Technology Equipment The 10000 and 10000 G2 Series racks are designed to comply with the applicable safety requirements for Information Technology Equipment (ITE) when the rack is configured with properly certified equipment. The 10000 and 10000 G2 Series racks are considered ITE compliant when the following conditions are met: • The rack is populated with individually certified products • All installation guidelines and instructions are followed Waste Electrical and Electronic Equipment directive The directive on Waste Electrical and Electronic Equipment (WEEE) requires manufacturers to finance the take back and recovery of waste from electrical and electronic equipment at the end of its useful life. Figure 2. WEEE disposal symbol Any product or product packaging marked with the symbol in Figure 2 must not be disposed of with other household waste. The customer must dispose of the product by delivering the product to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about locations to drop off equipment for recycling, please contact a local city office, the 6