HP 1200 Service Manual - Page 46
pad is not straight or you see space on, spring-loaded base. If the separation
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6 6 With one hand, reach through the input tray opening, and push the spring-loaded base down. With the other hand, position the new separation pad in the slot of the previous separation pad. Note 7 The tab on the right is larger to help you position the separation pad correctly. 7 Snap both sides of the separation pad firmly into place. CAUTION Make sure that the separation pad is 8 straight and that there is no space between the separation pad and the spring-loaded base. If the separation pad is not straight or you see space on one side, remove the separation pad, make sure that the larger tab is on the right, reinsert the separation pad, and snap both sides into place. 8 Reinstall the input trays, and then plug the printer in to turn it back on. 44 Chapter 3 - Maintenance EN