HP 1315 HP PSC 1310 series all-in-one - (English) User Guide - Page 72
hardware installation troubleshooting, to attach the front panel cover, troubleshooting
View all HP 1315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
troubleshooting chapter 12 hardware installation troubleshooting Use this section to solve any problems you might encounter while installing the HP psc hardware. problem possible cause and solution I received a message to attach the front panel cover The front panel cover is not attached, or it is attached incorrectly. to attach the front panel cover 1 Remove the adhesive backing from the front panel cover. step 1 step 2 My HP psc does not turn on 2 Raise the lid of the HP psc. Place the front panel cover into the recess and stick it into place. Note: The HP psc will not work until you attach the front panel cover. Make sure each of the power cords is firmly connected, and wait a few seconds for the HP psc to turn on. Also, if the HP psc is plugged in to a power strip, make sure the strip is turned on. 64 hp psc 1310 series