HP 14-ac600 Maintenance and Service Guide - Page 45
Hard drive, Remove the bottom cover see
View all HP 14-ac600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket. Description 1-TB, 5400-rpm, 2.5-in 750 GB, 5400 rpm, 2.5 in 500-GB, 5400-rpm, 7-mm Hard Drive Hardware Kit (includes bracket and cable) Spare part number 778192-005 778190-005 778188-005 813510-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the optical drive (see Optical drive on page 31), if installed. 6. Remove the bottom cover (see Bottom cover on page 34). To remove the hard drive: 1. Disconnect the hard drive cable from the system board (1). 2. Lift the hard drive assembly from the computer (2). 3. To disassemble the hard drive, pull the connector away from the drive to remove it (1). Component replacement procedures 37