HP 14-bp000 Maintenance and Service Guide - Page 40
Bottom cover, Remove the upper rubber foot
View all HP 14-bp000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Reverse this procedure to reassemble and install the display assembly components. Bottom cover Description Models without eMMC modules: Bottom cover for use in black models Bottom cover for use in white models Bottom cover for use in blue models Models with eMMC modules: Bottom cover for use in black models Bottom cover for use in white models Bottom cover for use in blue models Rubber Kit for use in black models Rubber Kit for use in white models Rubber Kit for use in blue models Spare part number 929709-001 931244-001 L00440-001 940558-001 940559-001 L00746-001 929645-001 931245-001 L00441-001 Before removing the bottom cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). To remove the bottom cover: 1. Position the computer upside down with the front toward you. 2. Remove the upper rubber foot (1) so you can access the screws underneath. 3. Remove the three Phillips PM2.5×6.0 screws (2) that were under the upper rubber foot. 32 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts