HP 15-bn000 Maintenance and Service Guide - Page 67
Speakers, Disconnect the speaker cable from the system board
View all HP 15-bn000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Speakers Description Speakers (includes left and right speakers and cable) Spare part number 813965-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the optical drive (see Optical drive on page 49), if installed. 6. Remove the bottom cover (see Bottom cover on page 52). To remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Remove the cable from the routing path (2), and then lift up and remove the speakers from the computer (3). NOTE: The speakers are not secured with screws. Note the rubber gaskets (4) that help secure the speakers to the computer. When installing the speakers, make sure the gaskets are installed correctly. Reverse this procedure to install the speakers. Component replacement procedures 59