HP 15-d090nr HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook - Page 79
CAUTION, built into the base enclosure.
View all HP 15-d090nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49). 5. Disconnect the WLAN module antenna cables from the WLAN module (see WLAN module on page 58). 6. Remove the following components: ● Service door (see Service door on page 55) ● Top cover (see Top cover/keyboard on page 61) To remove the display assembly: 1. Disengage the adhesive and disconnect the display panel cable (1) from the system board. 2. Remove the display panel cable from its routing path (2). 3. Release the wireless antenna cables from the clips (3) built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 4. Remove the five Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer. Component replacement procedures 71