HP 15-d090nr HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook - Page 94
Remove the seven Phillips PM2.5×5.0 screws, Lift the plastic tape from atop the fan
View all HP 15-d090nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
2. Position the computer upright, and then disconnect the following cables from the system board: (2): Speaker cable (3): USB board cable (4): Optical drive connector cable 3. Remove the seven Phillips PM2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the plastic tape from atop the fan (2). 86 Chapter 4 Removal and replacement procedures
2.
Position the computer upright, and then disconnect the following cables from the system board:
(2)
: Speaker cable
(3)
: USB board cable
(4)
: Optical drive connector cable
3.
Remove the seven Phillips PM2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift the plastic tape from atop the fan
(2)
.
86
Chapter 4
Removal and replacement procedures