HP 15-d099nr HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook - Page 92
Optical drive connector, Remove the optical drive connector
View all HP 15-d099nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Optical drive connector Description Optical drive connector Spare part number 747119-001 Before removing the optical drive connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49), and then remove the following components: ● Service door (see Service door on page 56) ● Top cover (see Top cover/keyboard on page 62) Remove the optical drive connector: 1. Disconnect the cable from the system board (1). 2. Insert a tool to pry up on each side of the connector (2) and push up to disengage it. 3. Remove the optical drive connector from the computer (3). Reverse this procedure to install the optical drive connector. 84 Chapter 4 Removal and replacement procedures