HP 15-f024wm HP 15 Notebook PC Maintenance and Service Guide - Page 63

eMMC board, Remove the two Phillips M2.5×4.0

Get HP 15-f024wm PDF manuals and user guides View all HP 15-f024wm manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Reverse this procedure to install the optical drive connector cable. eMMC board Description eMMC board, 32 GB eMMC cable Spare part number 776777-001 776775-001 Before removing the eMMC board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Optical drive (see Optical drive on page 32). b. Service door (see Service door on page 28). c. WLAN module (see WLAN module on page 30). d. Memory module (see Memory module on page 29). e. Keyboard (see Keyboard on page 37). f. Top cover (see Top cover on page 40). Remove the eMMC board: 1. Disconnect the eMMC board cable (1) from the system board. 2. Remove the two Phillips M2.5×4.0 (2) that secure the board to the base enclosure. Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Reverse this procedure to install the optical drive connector cable.
eMMC board
Description
Spare part number
eMMC board, 32 GB
776777-001
eMMC cable
776775-001
Before removing the eMMC board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
27
), and then remove the following components:
a.
Optical drive (see
Optical drive
on page
32
).
b.
Service door (see
Service door
on page
28
).
c.
WLAN module (see
WLAN module
on page
30
).
d.
Memory module (see
Memory module
on page
29
).
e.
Keyboard (see
Keyboard
on page
37
).
f.
Top cover (see
Top cover
on page
40
).
Remove the eMMC board:
1.
Disconnect the eMMC board cable
(1)
from the system board.
2.
Remove the two Phillips M2.5×4.0
(2)
that secure the board to the base enclosure.
Component replacement procedures
53