HP 15-f024wm HP 15 Notebook PC Maintenance and Service Guide - Page 78

System board see

Get HP 15-f024wm PDF manuals and user guides View all HP 15-f024wm manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Optical drive (see Optical drive on page 32). b. Service door (see Service door on page 28). c. WLAN module (see WLAN module on page 30). d. Memory module (see Memory module on page 29). e. Keyboard (see Keyboard on page 37). f. Top cover (see Top cover on page 40). g. Hard drive (see Hard drive on page 44). h. System board (see System board on page 55). Remove the display assembly: 1. Remove the three Phillips M2.5×5.0 screws (1) and Phillips M2.5×2.5 broadhead screw (2) that secures the display assembly to the base enclosure. 2. Remove the display assembly (3). 68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
27
), and then remove the following components:
a.
Optical drive (see
Optical drive
on page
32
).
b.
Service door (see
Service door
on page
28
).
c.
WLAN module (see
WLAN module
on page
30
).
d.
Memory module (see
Memory module
on page
29
).
e.
Keyboard (see
Keyboard
on page
37
).
f.
Top cover (see
Top cover
on page
40
).
g.
Hard drive (see
Hard drive
on page
44
).
h.
System board (see
System board
on page
55
).
Remove the display assembly:
1.
Remove the three Phillips M2.5×5.0 screws
(1)
and Phillips M2.5×2.5 broadhead screw
(2)
that secures
the display assembly to the base enclosure.
2.
Remove the display assembly
(3)
.
68
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts