HP 15-g060nr HP 15 Notebook PC Compaq 15 Notebook PC HP 250 G3 Notebook PC HP - Page 87
USB board
View all HP 15-g060nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
USB board Description USB board (includes cable) Spare part number 749649-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49), and then remove the following components: ● Keyboard (see Keyboard on page 55) ● Top cover (see Top cover on page 58) ● WLAN module (see WLAN module on page 66) ● System board (see System board on page 71) ● Hard drive (see Hard drive on page 64) To remove the USB board: 1. Position the computer upright. 2. Disconnect the USB board cable from the system board (1). 3. Remove the tape that secures it to the cable to the base enclosure (2). 4. Remove the Phillips PM2.5×5.0 screw (3) that secures the USB board to the base enclosure. 5. Remove the USB board (4). Reverse this procedure to install the USB board. Component replacement procedures 79