HP 1x1Ex8 HP IP Console Viewer User Guide - Page 55

5. Add up to four SNMP management stations that are allowed to monitor the console switch, such as HP Systems Insight Manager, or leave the field blank to allow any SNMP management station to manage the console switch. For more information, see "Adding, modifying, and deleting allowable managers (on page 55)." 6. Add up to four SNMP trap destinations to which this console switch sends traps and in the Trap Destination field. For more information, see "Adding, modifying, and deleting trap destinations (on page 55)." 7. Click OK to save the settings and close the window. -orClick Apply to save the settings and remain in the open window. -orClick Cancel to exit the window without saving. Adding, modifying, and deleting allowable managers In the Allowable Managers area, you can specify up to four SNMP management entities to monitor this console switch or leave this area blank to allow any station to monitor the console switch. You can also modify or delete an existing allowable manager. To add an Allowable Manager: 1. Click Add. The Allowable Manager dialog box appears. 2. Enter the IP address of the management station. 3. Click OK to add the management station. To modify an Allowable Manager: 1. Select and entry in the Allowable Managers list, and click Modify. The Allowable Manager dialog box appears. 2. Modify the entry as needed. 3. Click OK to save the changes. To delete an Allowable Manager: 1. Select an entry in the Allowable Managers list, and click Delete. You will be prompted to confirm the deletion. 2. Click Yes to confirm the deletion. Adding, modifying, and deleting trap destinations In the Trap Destinations area, you can specify up to four SNMP trap destinations to which this console switch sends traps. You can also modify and delete existing trap destinations. To add a trap destination: 1. Click Add. The Trap Destination dialog box appears. 2. Enter the IP address of the trap destination. 3. Click OK to add the trap destination. To modify a trap destination: 1. Select an entry in the Trap Destination list, and click Modify. The Trap Destination dialog box appears. Managing KVM console switches 55