HP 2000sa HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 87
MSA2000 drive enclosure port information, HP StorageWorks 2000sa Modular Smart
View all HP 2000sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
MSA2000 drive enclosure port information MSA2000 drive enclosures are supported for use in MSA2000sa and MSA2000sa G2 environments. As shown in the following illustration: • SAS In port: one, on the left-side of the I/O module. Labeled SAS, with a round symbol at the bottom of the label. Use this SAS expansion port to connect to an MSA controller enclosure or to an MSA2000 drive enclosure that is between this drive enclosure and the controller enclosure. • SAS Out port: one, on the right-side of the I/O module. Labeled SAS, with a diamond symbol at the bottom of the label. Use this SAS expansion port to connect (cascade) an additional MSA drive enclosure. NOTE: Mini-SAS to SAS cables are required when connecting MSA2000 drive enclosures. For more information, see the MSA2000 QuickSpecs or HP StorageWorks 2000sa Modular Smart Array supported cable configurations. MSA2000 drive enclosure port information 87