HP 2140 HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 61
Disconnect the power switch board cable, rests upside down in front of the computer.
UPC - 884420854753
View all HP 2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4. Turn the computer right-side up, with the front toward you. 5. Open the computer as far as possible. 6. On model 2133, remove the Torx8 T8M2.5×10.0 screw (1) that secures the top cover to the base enclosure, and then lift the rear edge of the top cover (2) and swing it up and forward until it rests upside down in front of the computer. On model 2140, remove the four Phillips PM2.0×7.0 screws (1) that secure the top cover to the base enclosure, and then lift the rear edge of the top cover (2) and swing it up and forward until it rests upside down in front of the computer. 7. Disconnect the power switch board cable (1) from the system board. 8. Release the ZIF connector (2) to which the TouchPad cable is connected and disconnect the TouchPad cable (3) from the system board. Component replacement procedures 53