HP 2140 HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 76
Fan/heat sink, T8M2.0×6.0 screws
UPC - 884420854753
View all HP 2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Fan/heat sink Description Fan/heat sink for use only in model 2133 Fan/heat sink for use only in model 2140 Spare part number 482279-001 511750-001 Before removing the fan/heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: a. Keyboard (see Keyboard on page 45) b. Hard drive or solid-state drive (see Mass storage device on page 49) c. Top cover (see Top cover on page 52) d. Audio board (see Audio board (Model 2133 only) on page 55) e. System board (see System board on page 59) If you have model 2133, remove the fan/heat sink: 1. Following the 1, 2, 3, 4, 5 sequence stamped into the fan/heat sink, remove the five Torx8 T8M2.0×6.0 screws (1) that secure the fan/heat sink to the system board. 68 Chapter 4 Removal and replacement procedures