HP 4100 HP MFP Digital Sending Software v. 4 - Support Guide - Page 18

Uninstalling the software Uninstall the HP DSS software by using the following directions. To uninstall the software using the uninstall program Note To uninstall the software from Windows 2000 or XP, you must log on with administrator privileges. 1 Close all of the open programs. 2 On the Start menu, point to Programs, point to Hewlett-Packard, point to HP MFP Digital Sending Software, and then click Uninstall. 3 In the Confirm Uninstall dialog box, click OK. 4 The uninstall process removes the program from your computer. At the end of the process, you might have to restart your computer. To uninstall the software by using Add or Remove Programs An alternate method for uninstalling the digital sending software is to use the Windows Add or Remove Programs method. 1 Click Start, point to Settings, and click Control Panel. 2 Click Add or Remove Programs. 3 Scroll through the list of software programs and click HP MFP Digital Sending Software. 4 Click Remove. Architectural overview The illustration below shows a network that uses HP DSS v. 4 Windows administrator computer TCP/IP Network Web browser SMTP gateway LAN fax server LDAP server Remote Printers FTP Server Network folders Digital sending components of a network Component Windows 2000, Windows XP Professional, or Windows 2003 server computer MFP products Description The administrator computer contains the following: ● HP DSS v. 4 ● HP MFP DSS Configuration Utility-used to configure and monitor digital sending features once the software has been installed ● Windows Fax service-required only when the Windows Fax service is the method of fax transport; a fax modem is also required HP DSS v. 4 can support up to 250 HP MFPs on the same server. Each MFP can be individually configured to support any or all of the digital sending options. The requirement for user authentication can also be individually configured for each MFP. 12 Chapter 1 - The HP MFP Digital Sending Software v. 4 ENWW