HP 425 Compaq 325 and 326 Notebook PCs HP 425 and 625 Notebook PCs - Maintenan - Page 67
Optical drive, Remove the Torx M2.5×6.0 screw
UPC - 884420783336
View all HP 425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description DVD±RW Double-Layer Drive with LightScribe (includes bezel) DVD-ROM Drive (includes bezel) Spare part number 608140-001 608141-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the service door (see Service door on page 49). Remove the optical drive: 1. Position the computer with the right side toward you. 2. Remove the Torx M2.5×6.0 screw (1) that secures the optical drive to the computer. 3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to the right to release the optical drive from the computer. 4. Remove the optical drive (3) from the computer. 5. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you. 6. Remove the two Phillips PM2.0×2.0 screws (1) that secure the optical drive bracket to the optical drive. Component replacement procedures 57