HP 425 Compaq 325 and 326 Notebook PCs HP 425 and 625 Notebook PCs - Maintenan - Page 96
webcam module with the pins on the display enclosure and press onto the double-sided tape.
UPC - 884420783336
View all HP 425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
3. Lift the bezel (4) from the display enclosure. 4. If it is necessary to replace the webcam module, disconnect the webcam cable from the module (1), and pull the webcam module (2) that is attached with adhesive off the display enclosure. The webcam module can be ordered by using spare part number 611026-001. NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam module with the pins on the display enclosure and press onto the double-sided tape. 5. If it is necessary to replace the display hinges, remove the six Torx M2.5×6.0 screws (1) that secure the display panel to the display enclosure. 86 Chapter 4 Removal and replacement procedures
3.
Lift the bezel
(4)
from the display enclosure.
4.
If it is necessary to replace the webcam module, disconnect the webcam cable from the module
(1)
, and pull the webcam module
(2)
that is attached with adhesive off the display enclosure. The
webcam module can be ordered by using spare part number 611026-001.
NOTE:
To replace the webcam module in the display enclosure, align the holes on the
webcam module with the pins on the display enclosure and press onto the double-sided tape.
5.
If it is necessary to replace the display hinges, remove the six Torx M2.5×6.0 screws
(1)
that
secure the display panel to the display enclosure.
86
Chapter 4
Removal and replacement procedures