HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 166
Output Setup submenu
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Item RAM DISK LANGUAGE Values OFF *AUTO *ENGLISH Several Explanation Determines how the RAM disk is configured. This item appears only if there is no optional hard disk accessory installed. OFF: The RAM disk is disabled. AUTO: Allows the printer to determine the optimal RAMdisk size based on the amount of available memory. Note If you change the setting from OFF to AUTO, the printer automatically reinitializes when it becomes idle. Selects the language for the messages that appear on the printer control panel display. Output Setup submenu This submenu allows you to select settings for the optional stapler/stacker, if it is installed. Some items on this menu are available in the program or printer driver (if the appropriate driver is installed). The section that follows lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it. Item STAPLER/STACKER STAPLES STAPLES OUT Values There is no value to select. *NONE ONE *STOP CONTINUE Explanation Configure behavior for the optional stapler/stacker. Determines whether print jobs are stapled or not. NONE: Turns off stapling. ONE: Turns on stapling. Note Selecting the stapler at the printer control panel changes the default setting to staple. It is possible that all print jobs will be stapled. For information about selecting the stapler at the printer control panel, see "To select the stapler at the control panel" on page 40. Determines how the printer behaves if the stapler runs out of staples, as indicated by the STAPLER OUT OF STAPLES message on the printer control panel display. STOP: The printer stops printing until you refill the stapler. CONTINUE: The stapler accepts print jobs if it is out of staples, but the pages will not be stapled. For information about ordering a new staple cartridge, see "Ordering information" on page 17. For information about refilling the stapler, see "Loading staples" on page 41. 164 Appendix A Control panel menus ENWW