HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 88
PS or PCL font list, To print a PS or PCL font list
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Note PS or PCL font list Use the font lists to see which fonts are currently installed in the printer. (The font lists also show which fonts are resident on an optional hard disk accessory or flash DIMM.) To print a PS or PCL font list 1 Press SELECT ( ) to open the menus. 2 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to INFORMATION, and then press SELECT ( ). 3 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to PRINT PS FONT LIST or PRINT PCL FONT LIST, and then press SELECT ( ). The PS font list shows the PS fonts installed, and gives a sample of those fonts. The following information can be found on the PCL font list: Font gives the font names and samples. Pitch/Point indicates the pitch and point size of the font. Escape Sequence (a PCL 5e programming command) is used to select the designated font. (See the legend at the bottom of the font list page.) For step-by-step instructions about using printer commands to select a font with MS-DOS® programs, see "Selecting PCL 6 and PCL 5e fonts" on page 177. Font # is the number used to select fonts at the printer control panel (not in the program). Do not confuse the font # with the font ID, described below. The number indicates the DIMM slot where the font is stored. • SOFT: Downloaded fonts, which stay resident in the printer until other fonts are downloaded to replace them, or until the printer power is turned off. • INTERNAL: Fonts that permanently reside in the printer. Font ID is the number you assign to soft fonts when you download them through software. 86 3 Managing and maintaining the printer ENWW