HP 4415s Memory Modules - Windows Vista and Windows 7
HP 4415s - ProBook - Turion II M520 Manual
UPC - 884962601167
View all HP 4415s manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 4415s manual content summary:
- HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 1
Memory Modules User Guide - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 2
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Third Edition: September 2009 First Edition: April 2009 Document Part Number: 516611-003 Product notice This user guide - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 3
Table of contents Adding or replacing memory modules Index ...13 iii - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 4
iv - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 5
or replacing memory modules The computer has one memory module compartment, which is located under the keyboard. The memory capacity of the computer shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 6
down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery from the computer. 2 Adding or replacing memory modules - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 7
7. Remove the screws from the battery area. Your computer has 4, 5, or 7 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 3 - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 8
: Do not use excessive force to open the computer beyond the limits of the display hinges. Forcing extension beyond these limits will cause damage to the display. 10. Slide the switch cover straight back towards the display, and then remove the switch cover. 4 Adding or replacing memory modules - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 9
11. Remove the screws from the keyboard. Your computer has either 2 or 3 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 5 - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 10
. CAUTION: Do not rip the keyboard cable. For 14-inch computers, slide the keyboard back toward the display (1), and then rotate it to the right side (2) to gain access to the keyboard connector. CAUTION: Do not rip the keyboard cable. 13. If you are replacing a memory module, remove the existing - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 11
module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 14. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 12
into place. 15. For 15- and 17-inch computers, turn over the keyboard (1) into the keyboard tray, and then slide the keyboard into place (2). For 14-inch computers, turn over the keyboard (1) into the keyboard tray, and then slide the keyboard into place (2). 8 Adding or replacing memory modules - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 13
16. Replace the screws on the keyboard. Your computer has either 2 or 3 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 17. Slide the switch cover into place. 18. Close the computer display. 9 - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 14
19. Replace the 2 screws and their covers on the back edge of the computer. 10 Adding or replacing memory modules - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 15
20. Replace the screws in the battery area. Your computer has 4, 5, or 7 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 11 - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 16
21. Turn the computer upside down on a flat surface, and then replace the battery. 22. Reconnect external power and external devices. 23. Turn on the computer. 12 Adding or replacing memory modules - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 17
Index K keyboard removing 6 M memory module removing 6 memory modules, replacing 1 S switch cover removing 4 Index 13 - HP 4415s | Memory Modules - Windows Vista and Windows 7 - Page 18
Memory Modules
User Guide