HP 4570C HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning Manual - Page 7
Cleaning, reassembly, re-mount the top cover to the scanner
UPC - 808736181358
View all HP 4570C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cleaning clean the glass You are now ready to clean the underside of the glass. Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl alcohol because it can leave streaks on the glass. Do not spray the glass cleaner directly on the glass. Do not allow the cleaner to seep between the glass and the plastic. If liquid gets between the glass and the plastic it could stain the calibration strip ( the white strip under the glass) and render your scanner useless. If the cleaner gets in the calibration strip area, the scanner must be sent to hp for repair. 10 Apply glass cleaner sparingly to a soft, lint-free cloth and clean the glass. reassembly re-mount the top cover to the scanner When you have finished cleaning the underside of the glass, reassemble the top cover. 11 Hold the top cover directly above the scanner and slide the front of the top cover into bezel first and then lower the back into place. top cover being installed onto base