HP 4600dn HP color LaserJet 4600 Series - User Guide - Page 201

Note WWW ENWW Allow transparencies to cool at least 30 seconds before handling them. z In the printer driver's Paper tab, select Transparency as the media type. Also, make sure that the tray is correctly configured for transparencies. z Check that the transparencies meet the specifications for this printer. See Supported media weights and sizes. For more information, consult the HP LaserJet Family Paper specification Guide. See http://www.hp.com/support/lj4600 for HP LaserJet Family Paper Specification Guide ordering information. For downloadable manuals, go to http://www.hp.com/support/lj4600. When you connect, select Manuals. z Handle transparencies by the edges. Skin oil on the surface of transparencies can cause spots and smudges. z Small, random dark areas on the trailing edge of solid fill pages may be caused by transparencies sticking together in the output bin. Try printing the job in smaller batches. z The selected colors are undesirable when printed. Select different colors in the software application or printer driver. z If you are using a reflective overhead projector, use a standard overhead projector instead. Print quality problems associated with the environment z The printer is operating in excessively humid or dry conditions. Verify that the printing environment is within specifications. See Operating environment specifications. Print quality problems associated with jams z Make sure that all media is cleared from the paper path; see Paper jam recovery. z The printer recently jammed. Print two to three pages to clean the printer. z The media does not pass through the fuser causing image defects to appear on subsequent documents. Print two to three pages to clean the printer. However, if the problem persists see the next section. 187