HP 5100tn HP PCL/PJL reference - PCL 5 Comparison Guide - Page 125
Output Bin Command, Printer-Specific Differences 2-77
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Note Output Bin Command This command selects the destination bin into which the print job is output when printed. ?&l#G # = 0 - Automatic selection 1 - Selects bin #1 (printer top/face-down bin) 2 - Selects bin #2 (printer left/face-up bin; this bin not available when the High Capacity Output (HCO) is attached) 3 - Selects bin #3 (HCO face up bin) 4 - Selects bin #4 (HCO #1 face down bin) 5 - Selects bin #5 (HCO #2 face down bin) 6 - Selects bin #6 (HCO #3 face down bin) 7 - Selects bin #7 (HCO #4 face down bin) 8 - Selects bin #8 (HCO #5 face down bin) 9 - Selects bin #9 (HCO #6 face down bin) 10 - Selects bin #10 (HCO #7 face down bin) 11 - Selects bin #11 (HCO #8 face down bin) Default = 0 Range = 0 to 11 The Output Bin command is not recommended. Instead, it is preferred that the PJL OUTBIN command be used to set the default media destination. ENWW Printer-Specific Differences 2-77