HP 510X HP Jetdirect Print Server Administrator's Guide (300x, 510x) - Page 73

Table 7.2, General HP Jetdirect Messages 5 of 10, HP Jetdirect Configuration Messages 73 - memory

Get HP 510X - JetDirect Print Server PDF manuals and user guides
UPC - 882780451322
View all HP 510X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Table 7.2 General HP Jetdirect Messages (5 of 10) Message Description LAN ERROR-TRANSMITTER OFF There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the print server off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. LAN ERROR-UNDERFLOW There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the print server off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. LAN ERROR-WIRE FAULT There is a problem with the network cabling. Check the cabling between the printer and the network. LATE COLLISION ERROR Check the network topology, verify all cable segments, and make sure no segment is too long. LOSS OF CARRIER ERROR Check the network connections. If the connections are intact, run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. MEMORY ERROR Run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. NDS AUTHENTICATION ERROR Unable to log onto the NetWare directory tree. Make sure that the print server object is defined in the directory at the correct context. NDS CONNECTION STATE ERROR The HP Jetdirect print server cannot change the NDS connection state. Check licenses on the spooling server. NDS ERR: CANNOT READ Q HOST Cannot locate the file server on the network. The server may not be running at this time or a communications problem may exist. NDS ERR: CHANGE PSSWD FAILED Cannot modify the print server password to the value expected by the HP Jetdirect print server. NDS ERR: EXCEEDS MAX SERVERS More queues were assigned than the HP Jetdirect print server can handle. Remove one or more print queues from the list to be serviced by Queue Server Mode. NDS ERR: INVALID SRVR VERS The current version of the NetWare file server is not supported. NDS ERR: MAX PRINT OBJECTS Too many printer objects are assigned to the print server object. Reduce the number of printer objects assigned to the print server using NWADMIN. ENWW HP Jetdirect Configuration Page Messages 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
ENWW
HP Jetdirect Configuration Page Messages 73
LAN
ERROR-TRANSMITTER
OFF
There may be a problem with your network cabling or the
HP Jetdirect print server. Check the cabling and
connectors on your Ethernet network. If you cannot find a
problem with your network cabling, run the power-on
self-test: turn the print server off, then on again. If the error
persists, there is a problem with the HP Jetdirect print
server.
LAN
ERROR-UNDERFLOW
There may be a problem with your network cabling or the
HP Jetdirect print server. Check the cabling and
connectors on your network. If you cannot find a problem
with your network cabling, run the power-on self-test: turn
the print server off, then on again. If the error persists,
there is a problem with the HP Jetdirect print server.
LAN ERROR-WIRE
FAULT
There is a problem with the network cabling. Check the
cabling between the printer and the network.
LATE COLLISION
ERROR
Check the network topology, verify all cable segments, and
make sure no segment is too long.
LOSS OF CARRIER
ERROR
Check the network connections. If the connections are
intact, run the power-on self-test: turn the print server off,
then on again. If the error persists, replace the
HP Jetdirect print server.
MEMORY ERROR
Run the power-on self-test: turn the print server off,
then on again. If the error persists, replace the
HP Jetdirect print server.
NDS AUTHENTICATION
ERROR
Unable to log onto the NetWare directory tree. Make sure
that the print server object is defined in the directory at the
correct context.
NDS CONNECTION
STATE ERROR
The HP Jetdirect print server cannot change the NDS
connection state. Check licenses on the spooling server.
NDS ERR: CANNOT
READ Q HOST
Cannot locate the file server on the network. The server
may not be running at this time or a communications
problem may exist.
NDS ERR: CHANGE
PSSWD FAILED
Cannot modify the print server password to the value
expected by the HP Jetdirect print server.
NDS ERR: EXCEEDS
MAX SERVERS
More queues were assigned than the HP Jetdirect print
server can handle. Remove one or more print queues from
the list to be serviced by Queue Server Mode.
NDS ERR: INVALID
SRVR VERS
The current version of the NetWare file server is not
supported.
NDS ERR: MAX PRINT
OBJECTS
Too many printer objects are assigned to the print server
object. Reduce the number of printer objects assigned to
the print server using NWADMIN.
Table 7.2
General HP Jetdirect Messages (5 of 10)
Message
Description