HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 166
schedule reboot at, hh:mm, MM/DD/YYYY, YYYY/MM/DD
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
schedule reboot at Syntax schedule reboot at hh:mm [ date ] View undo schedule reboot User view Default level 3: Manage level Parameters hh:mm: Specifies a reboot time, in the hh:mm format. The hh value ranges from 0 to 23, and the mm value ranges from 0 to 59. date: Specifies a reboot date, in the MM/DD/YYYY or YYYY/MM/DD format. The YYYY value ranges from 2000 to 2035, the MM value ranges from 1 to 12, and the DD value ranges from 1 to 31. Description CAUTION: • Device reboot can interrupt network services. • Changing any clock setting can cancel the reboot schedule. Use schedule reboot at to schedule a reboot to occur at a specific time and date. Use undo schedule reboot to disable the scheduled reboot function. By default, the scheduled reboot function is disabled. The interval between the reboot date and the current date cannot exceed 30 x 24 hours, or 30 days. When no reboot date is specified: • If the reboot time is later than the current time, a reboot occurs at the reboot time of the current day. • If the reboot time is earlier than the current time, a reboot occurs at the reboot time the next day. The switch supports only one device reboot schedule. If you configure the schedule reboot at command multiple times, the last configuration takes effect. The schedule reboot at command and the schedule reboot delay command overwrite each other, and whichever is configured last takes effect. The alert "REBOOT IN ONE MINUTE" appears one minute before the reboot time. For data security, if you are performing file operations at the reboot time, the system does not reboot. Related commands: schedule reboot delay. Examples # Configure the switch to reboot at 12:00 AM. This example assumes that the current time is 11:43. schedule reboot at 12:00 Reboot system at 12:00 06/06/2010(in 0 hour(s) and 16 minute(s)) confirm? [Y/N]: Enter y at the prompt. If you have used the terminal logging command to enable the log display function (enabled by default) on the terminal, the system automatically displays a reboot schedule log message. 159