HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Confi - Page 245
Configuring outbound route filtering, Command, Remarks, network
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
Step 1. Enter system view. 2. Enter BGP view. 3. Enter IPv6 address family view. Command system-view bgp as-number ipv6-family 4. Advertise a default route to peer { ipv6-group-name | ipv6-address } an IPv6 peer or peer default-route-advertise [ route-policy group. route-policy-name ] Remarks N/A N/A N/A Not advertised by default. With the peer default-route-advertise command executed, the local router advertises a default route with itself as the next hop to the specified IPv6 peer or peer group, regardless of whether the default route is available in the routing table. Configuring outbound route filtering IPv6 BGP advertises routes passing the specified policy to peers. Using the protocol argument can filter only the routes redistributed from the specified protocol. If no protocol is specified, IPv6 BGP filters all routes to be advertised, including redistributed routes and routes imported with the network command. To configure outbound route filtering: Step 1. Enter system view. Command system-view Remarks N/A 2. Enter BGP view. 3. Enter IPv6 address family view. bgp as-number ipv6-family N/A N/A 4. Configure the filtering of outgoing routes. filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol process-id ] Not configured by default. 5. Apply a routing policy to routes advertised to an IPv6 peer or peer group. peer { ipv6-group-name | ipv6-address } route-policy route-policy-name export Not applied by default. 6. Specify an IPv6 ACL to filter routes advertised to an IPv6 peer or peer group. peer { ipv6-group-name | ipv6-address } filter-policy acl6-number export Not specified by default. 7. Specify an AS path list to filter routes advertised to an IPv6 peer or peer group. peer { ipv6-group-name | ipv6-address } as-path-acl as-path-acl-number export Not specified by default. 8. Specify an IPv6 prefix list to filter routes advertised to an IPv6 peer or peer group. peer { ipv6-group-name | ipv6-address } ipv6-prefix ipv6-prefix-name export Not specified by default. 235