HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Command Reference
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 1
HP 6125XLG Blade Switch IRF Command Reference Part number: 5998-3731 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 3
15 irf-port load-sharing mode 16 irf-port-configuration active 16 mad arp enable 18 mad bfd enable 19 mad enable 20 mad exclude interface 21 mad ip address 22 mad nd enable 23 mad restore 24 port group interface 24 Support and other resources 27 Contacting HP 27 Subscription service 27 - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 4
IRF commands display irf Use display irf to display IRF fabric information, including the member ID, role, priority, bridge MAC address, and description of each IRF member. Syntax display irf Views Any view Predefined user roles network-admin network-operator Examples # Display IRF fabric - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 5
the display current-configuration command. Bridge MAC address of the IRF fabric. Status of the software auto-update function: • yes-Enabled. The master automatically propagates its software images to the device you are adding to the IRF fabric. • no-Disabled. You must manually make sure the joining - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 6
the IRF port, this field displays disable. Related commands • display irf • display irf topology display irf link Use display irf link to display IRF link information, including IRF ports, physical IRF ports, and IRF link status. Syntax display irf link Views Any view Predefined user roles - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 7
number: • 1-IRF-port 1. • 2-IRF-port 2. Physical ports bound to the IRF port. If no physical port has been bound to the IRF port, this field displays disable. Link state of IRF physical ports: • UP-Link is up. • DOWN-Link is down. • ADM-The port has been manually shut down with the shutdown command - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 8
IRF fabric. Related commands • display irf • display irf configuration display irf-port load-sharing mode Use display irf-port load-sharing mode to display IRF link load sharing mode. Syntax display irf-port load-sharing mode [ irf-port [ member-id/port-number ] ] Views Any view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 9
mode used on a specific IRF port, specify both the irf-port keyword and the member-id/port-number argument. Examples # Display the global load sharing mode for IRF links. In this example, because no user-defined global load sharing mode has been configured, the default global load sharing mode - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 10
Predefined user roles network-admin network-operator Parameters verbose: Displays detailed MAD information. If this keyword is not specified, the command Current MAD status: Detect Excluded ports(configurable): Excluded ports(can not be configured): Ten-GigabitEthernet1/0/17 Ten-GigabitEthernet1/0/ - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 11
to Detect. Ports manually configured to not shut down when the IRF fabric transits to the Recovery state. Ports by default set to not shut down when the IRF fabric transits to the Recovery state. irf auto-update enable Use irf auto-update enable to enable the software auto-update function for - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 12
and Monitoring Configuration Guide). Examples # Enable the software auto-update function. system-view [Sysname] irf auto-update enable irf domain Use irf domain to assign a domain ID to the IRF fabric. Use undo irf domain to restore the default IRF domain setting. Syntax irf domain domain - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 13
10 irf link-delay Use irf link-delay to set a delay for the IRF ports to report a link down event. Use undo irf link-delay to restore the default. Syntax irf link-delay interval undo irf link-delay Default The IRF link down event report delay is 4 seconds. Views System view Predefined user roles - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 14
to enable immediate bridge MAC address change after the master leaves. Configure the irf mac-address persistent always command in one of the following situations: • TRILL is configured. • The IRF fabric uses a daisy-chained topology, and it has aggregate links with upstream or downstream devices - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 15
irf member description to configure a description for an IRF member. Use undo irf member description to restore the default. Syntax irf member member-id description text undo irf member member-id description Default No description is configured for any IRF member. Views System view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 16
of 1 to 10. new-member-id: Assigns a new ID to the IRF member, in the range of 1 to 10. Usage guidelines CAUTION: Changing the IRF member ID of a device can cause losses of member ID-related configurations, including settings on physical ports, at reboot. To have the new ID take effect, you must - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 17
ID may result in configuration change or loss. Continue?[Y/N]:Y irf-port Use irf-port to enter IRF port view. Use undo irf-port to remove all port bindings of an IRF port. Syntax irf-port member-id/port-number undo irf-port member-id/port-number Views System view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 18
not support a criterion combination, the system displays an error message. If you configure the global load sharing mode multiple times, the most recent configuration takes effect. You can also configure a port-specific load sharing mode for an IRF port in IRF port view. An IRF port preferentially - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 19
load-sharing mode Use irf-port load-sharing mode to configure a port-specific load sharing mode for an IRF port to distribute traffic across its physical links. Use undo irf-port load-sharing mode to restore the default. Syntax irf-port load-sharing mode { destination-ip | destination-mac | source - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 20
Syntax irf-port-configuration active Views System view Predefined user roles network-admin Usage guidelines After connecting the physical ports between two devices and binding them to the correct IRF ports, you must use this command to activate the settings on the IRF ports to merge the two devices - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 21
. # Activate the IRF port. [Sysname] irf-port-configuration active mad arp enable Use mad arp enable to enable ARP MAD. Use undo mad arp enable to disable ARP MAD. Syntax mad arp enable undo mad arp enable Default ARP MAD is disabled. Views VLAN interface view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 22
domain ID is: 1 Related commands irf domain mad bfd enable Use mad bfd enable to enable BFD MAD. Use undo mad bfd enable to disable BFD MAD. Syntax mad bfd enable undo mad bfd enable Default BFD MAD is disabled. Views VLAN interface view Predefined user roles network-admin Usage guidelines You - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 23
problems, only use the mad ip address command to configure IP addresses on the BFD MAD-enabled VLAN interface. Do not configure an IP address with the ip address command or configure undo mad enable Default LACP MAD is disabled. Views Aggregate interface view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 24
ports except the IRF ports and the ports manually configured to not shut down. If a port must be kept in up state for special purposes such as Telnet connection, exclude it from the shutdown action. To avoid incorrect traffic forwarding, HP recommends not excluding any ports except the ports - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 25
address on a BFD MAD-enabled VLAN interface for each IRF member, and make sure all the MAD IP addresses are on the same subnet. To avoid problems, only use the mad ip address command to configure IP addresses on the BFD MAD-enabled VLAN interface. Do not configure an IP address with the ip address - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 26
to change the current domain ID, press enter at the prompt. An IRF fabric has only one IRF domain ID. You can change the IRF domain ID with the following commands: irf domain, mad enable, mad arp enable, or mad nd enable. The IRF domain IDs configured by using these commands overwrite each other. 23 - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 27
are inactive. MAD shuts down all their physical ports except the IRF ports and the ports manually configured to not shut down. If the active IRF fabric has failed to work before the IRF split problem is fixed, use this command to restore an IRF fabric in Recovery state to take over the active - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 28
-name Default No physical ports are bound to any IRF port. Views IRF port view Predefined user roles network-admin Parameters interface-type interface-number: Specifies a physical port by its type and number. interface-name: Specifies a physical port in the interface-typeinterface-number format - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 29
[Sysname-irf-port3/1] quit [Sysname] interface ten-gigabitethernet 3/0/18 [Sysname-Ten-GigabitEthernet3/0/18] undo shutdown [Sysname-Ten-GigabitEthernet3/0/18] quit [Sysname] interface ten-gigabitethernet 3/0/17 [Sysname-Ten- - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 30
Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn 27 - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 31
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands bold text. For example, the New User window appears; click OK. Multi-level or damage to hardware or software. An alert that calls - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 32
wired-WLAN switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering in examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 33
mad,6 Documents,27 I irf auto-update enable,8 irf domain,9 irf link-delay,10 irf mac-address persistent,10 irf member description,12 irf member priority,12 irf member renumber,13 irf-port,14 irf-port global load-sharing mode,15 irf-port load-sharing mode,16 irf-port-configuration active,16 M mad
HP 6125XLG Blade Switch
IRF
Command Reference
Part number: 5998-3731
Software version: Release 2306
Document version: 6W100-20130912