HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 8
display irf-port load-sharing mode, Related commands, Syntax, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Field IRF-Port2 MemberID Link neighbor Belong To Description Information about IRF port 2, including its link state and neighbor. IRF member ID. Link state of the IRF port: • UP-IRF link is up. • DOWN-IRF link is down because the port has no physical link or has not been activated by the irf-port-configuration active command. • DIS-No physical ports have been bound to the IRF port. You must use the port group interface command to bind at least one physical port to the IRF port. • TIMEOUT-IRF hello interval has timed out. You must examine the link for a connection loss. IRF member ID of the device connected to the IRF port. If no device is connected to the port, this field displays two hyphens (--). CPU MAC address of the master in the IRF fabric. Related commands • display irf • display irf configuration display irf-port load-sharing mode Use display irf-port load-sharing mode to display IRF link load sharing mode. Syntax display irf-port load-sharing mode [ irf-port [ member-id/port-number ] ] Views Any view Predefined user roles network-admin network-operator Parameters irf-port: Displays IRF port-specific load sharing modes. member-id/port-number: Specifies an IRF port number. The member-id argument represents an IRF member ID. The port-number argument represents the index number (1 or 2) of the IRF port on the member device. Usage guidelines To display the global load sharing mode for IRF links, execute this command without any keyword or argument. To display the load sharing mode used on each IRF port in the IRF fabric, specify the irf-port keyword but not any IRF port. If no IRF ports are in up state, this command displays "No IRF link exists." 5