HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Command Reference - Page 27

Examples # Enable ND MAD on VLAN-interface 3. system-view [Sysname] interface vlan-interface 3 [Sysname-Vlan-interface3] mad nd enable You need to assign a domain ID (range: 0-4294967295) [Current domain is: 0]: 1 The assigned domain ID is: 1 Related commands irf domain mad restore Use mad restore to restore the normal MAD state of the IRF fabric in Recovery state. Syntax mad restore Views System view Predefined user roles network-admin Usage guidelines When MAD detects that an IRF fabric has split into multiple IRF fabrics, it sets one of the IRF fabrics to the Detect state and other IRF fabrics to the Recovery state. • The Detect-state IRF fabric is active and can continue to forward traffic. • The Recovery-state IRF fabrics are inactive. MAD shuts down all their physical ports except the IRF ports and the ports manually configured to not shut down. If the active IRF fabric has failed to work before the IRF split problem is fixed, use this command to restore an IRF fabric in Recovery state to take over the active IRF fabric role. Examples # Restore the normal MAD state of the IRF fabric in Recovery state. system-view [Sysname] mad restore This command will restore the device from multi-active conflict state. Continue? [Y/N]:Y Restoring from multi-active conflict state, please wait... port group interface Use port group interface to bind a physical port to an IRF port. Use undo port group interface to remove the binding of a physical port and an IRF port. Syntax port group interface interface-type interface-number 24