HP 648c (English) Windows Connect * Users Guide - Page 57
Storing print cartridges, If the Resume - power cord
View all HP 648c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Align the arrow on the print cartridge with the notch on top of the cradle, and push the arrow toward the notch until the print cartridge snaps into place. Tri-Color cartridge Black or Photo cartridge 6 Close the top cover. The Resume light continues to blink for awhile and then goes off. (You'll hear the cartridge cradle return to its home position on the right side of the printer.) Storing print cartridges To maintain excellent print quality from your print cartridges: • Keep all print cartridges in their sealed packages, at room temperature (60-78 degrees F or 15.6-26.6 degrees C), until you are ready to use them. • Once installed, leave the print cartridges in their cradle at all times to keep them from drying out or becoming clogged. • Store unsealed print cartridges in an airtight plastic container. • Do not unplug the printer until printing is complete and the print cartridge cradle has returned to its home position on the right side of the printer. The print cartridges will dry out if not stored in their home position. • Turn off the printer and allow the print cartridges to return to the right side of the printer for proper capping of the nozzles before unplugging the power cord or turning off any attached power strip. 7 If the Resume light continues to blink after you install new print cartridges, check the part numbers on the cartridges to ensure you installed the correct ones. 57