HP 6520s HP Compaq 6520s Notebook PC - Maintenance and Service Guide - Page 61
Display assembly, Keyboard see
View all HP 6520s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Display assembly NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables. Description Spare part number 14.1-inch, WXGA BrightView display assembly for use only with computer models equipped with discrete graphics subsystem memory 456598-001 14.1-inch, WXGA display assembly for use only with computer models equipped with discrete graphics subsystem memory 456597-001 14.1-inch, WXGA BrightView display assembly for use only with computer models equipped with UMA graphics subsystem memory 456596-001 14.1-inch, WXGA display assembly for use only with computer models equipped with UMA graphics 456595-001 subsystem memory Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 40). 6. Remove the following components: a. Keyboard (see Switch cover and keyboard on page 47) b. Switch cover (see Switch cover and keyboard on page 47) c. Speaker (see Speaker on page 51) d. Display lid switch module (see Display lid switch module on page 52) Remove the display assembly: 1. Close the computer and turn it upside down, with the rear panel toward you. Component replacement procedures 53