HP 6730b HP Compaq 6735b Notebook PC and HP Compaq 6730b Notebook PC - Mainten - Page 107
System board, computer on, and then shut it down through the operating system.
UPC - 884420990376
View all HP 6730b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Remove the serial connector and cable: 1. Disconnect the serial connector cable (1) from the system board. 2. Remove the two HM5.0×9.0 screw locks (2) that secure the serial connector to the base enclosure. 3. Remove the serial connector (3) from the clip built into the base enclosure. 4. Remove the serial connector and cable. Reverse this procedure to install the serial connector and cable. System board NOTE: All system board spare part kits include replacement thermal material. Description Spare part number For use only with HP Compaq 6735b computer models equipped with both WLAN and WWAN 488193-001 modules For use only with HP Compaq 6735b computer models equipped with a WLAN module but not a 488194-001 WWAN module For use only with HP Compaq 6730b computer models equipped with both WLAN and WWAN 486247-001 modules For use only with HP Compaq 6730b computer models equipped with a WLAN module but not a 486248-001 WWAN module Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. Component replacement procedures 97