HP 6730b HP Compaq 6735b Notebook PC and HP Compaq 6730b Notebook PC - Mainten - Page 80
is included with all heat sink, system board, and processor spare part kits.
UPC - 884420990376
View all HP 6730b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3. Lift the right side of the heat sink (1) until it releases from the system board components. NOTE: Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach it. 4. Remove the heat sink (2) by sliding it to the right. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board components each time the heat sink is removed. Thermal pads are used on the Northbridge chip (1) and the section of the heat sink (1) that services it. Thermal paste is used on the processor (2) and the section of the heat sink (2) that services it. Replacement thermal material is included with all heat sink, system board, and processor spare part kits. NOTE: Steps 5 through 8 apply only to HP Compaq 6735b computer models. See steps 1 through 4 for removing the heat sink on HP Compaq 6730b computer models. 5. Remove the two Phillips PM2.0×4.0 screws (1) that secure the heat sink clips to the heat sink. 70 Chapter 4 Removal and replacement procedures