HP 680n HP Jetdirect 200m Print Server - (English) Administrator Guide - Page 193
Procedure 3: Resolving Printer Display ErrorMessages, Reinstall the HP
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Procedure 3: Resolving Printer Display Error Messages Check the following information to resolve network-related error messages that appear on the printer control panel display. This information assumes you have already printed a configuration page. 1. Does the printer's control panel display messages similar to the following? EIO X NOT FUNCTIONAL 8X.YYYY EIO ERROR (where X is the EIO slot number and YYYY is an error code) Refer to your printer manuals to interpret the error message. If you upgraded the Jetdirect firmware recently, power the print server off/on. For internal Jetdirect cards, turn the printer off and back on again. Reinstall the HP Jetdirect print server to ensure it is installed correctly, and verify all connectors are fully mated. If possible, print an HP Jetdirect configuration page and verify all configuration parameters. To interpret HP Jetdirect configuration page messages, see Chapter 9. If your printer contains multiple EIO slots, try using a different slot. Turn off the printer, remove the HP Jetdirect print server, and turn the printer back on. If the error message disappears when the print server is removed, it is likely that the print server was causing the error. Replace the print server. Record all error codes and contact your service provider. If you need to replace the HP Jetdirect print server under warranty service, include all diagnostic and configuration pages with the faulty print server. 2. Does EIOX INITIALIZING/DO NOT POWER OFF appear on the display? Wait for ten minutes to see if it clears. If it does not, you may need to replace the HP Jetdirect print server. ENWW Troubleshooting the HP Jetdirect Print Server 193