HP 680n HP Jetdirect 200m Print Server - (English) Administrator Guide - Page 48
Table 3.1, Tags Supported in a BOOTP/DHCP Boot file, TCP/IP Configuration 48
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Table 3.1 Item Tags Supported in a BOOTP/DHCP Boot file (2 of 4) RFC 2132 Option Description sm 1 The subnet mask tag. The subnet mask will be used by the HP Jetdirect print server to identify the portions of an IP address that specify the network/subnetwork number and the host address. gw 3 The gateway IP address tag. This address identifies the IP address of the default gateway (router) that the HP Jetdirect print server will use for communications with other subnets. ds 6 DNS (Domain Name System) server's IP address tag. Only a single name server can be specified. lg 7 The syslog server's IP address tag. It specifies the server that the HP Jetdirect print server sends syslog messages to. For more information, see Appendix A. hn 12 The host name tag. This tag does not take a value but causes the BOOTP daemon to download the host name to the HP Jetdirect print server. The host name will be printed on the Jetdirect configuration page, or returned on an SNMP sysName request by a network application. dn 15 Domain name tag. Specifies the domain name for the HP Jetdirect print server (for example, support.hp.com). It does not include the host name; it is not the Fully Qualified Domain Name (such as printer1.support.hp.com). ef 18 Extensions file tag that specifies the relative path name of the TFTP configuration file. Note: This tag is similar to the vendor-specific tag T144, described below. na 44 Tag for IP addresses of the NetBIOS-over-TCP/IP Name Server (NBNS). A primary and secondary server may be specified in order of preference. lease-time 51 DHCP IP address lease duration time (seconds). tr 58 DHCP T1 timeout, specifying the DHCP lease renewal time (seconds). ENWW TCP/IP Configuration 48