HP 6820s HP Compaq 6820s Notebook PC - Maintenance and Service Guide - Page 60
Display lid switch module
UPC - 883585963447
View all HP 6820s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Display lid switch module NOTE: The display lid switch module is included in the Cable Kit, spare part number Cable Kit, spare part number 457615-001. Before removing the display lid switch module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the switch cover and keyboard (see Switch cover and keyboard on page 45). Remove the display lid switch module: 1. Disconnect the display lid switch module cable (1) from the system board. 2. Remove the display lid switch module (2) from the clip built into the top cover. 3. Remove the display lid switch module cable from the clips (3) built into the top cover. Reverse this procedure to install the display lid switch module. 50 Chapter 4 Removal and replacement procedures