HP 7210 Users Guide - Page 147
Wireless network settings, this parameter does not apply to this network - officejet wireless
UPC - 882780030954
View all HP 7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Set up your network Chapter 13 (continued) Parameter Admin Password Link Configuration Description Status of the administrator's password for the Embedded Web Server: ● Set: password is specified. You must enter the password to make changes to the Embedded Web Server parameters. ● Not Set: no password is set. A password is not required for making changes to the Embedded Web Server parameters. The speed at which data is transmitted over a network: ● 10TX-Full: for wired network. ● 10TX-Half: for wired network. ● 100TX-Full: for wired network. ● 100TX-Half: for wired network. ● None: networking is disabled. Wireless network settings The following table describes the wireless network settings shown on the network configuration page. Parameter Description Wireless Status Status of the wireless network: ● Connected: the HP All-in-One is connected to a wireless LAN and everything is working. ● Disconnected: the HP All-in-One is not connected to the wireless LAN due to incorrect settings (such as the wrong WEP key), or the HP All-in-One is out of range. ● Disabled: either the radio is turned off, or the Ethernet cable is plugged in. ● Not applicable: this parameter does not apply to this network type. Communicatio n Mode An IEEE 802.11 networking framework in which devices or stations communicate with each other: ● Infrastructure: the HP All-in-One communicates with other network devices through a wireless access point, such as a wireless router or base station. ● ad hoc: the HP All-in-One communicates directly with each device on the network. No wireless access point is used. This is also called a peer-to-peer network. On Macintosh networks, ad hoc mode is called computer-to-computer mode. ● Not applicable: this parameter does not apply to this network type. Network Service Set Identifier. A unique identifier (up to 32 characters) that Name (SSID) differentiates one wireless local area network (WLAN) from 144 HP Officejet 7200 All-in-One series