HP 8/24 Brocade Fabric OS Administrator's Guide v6.3.0 (53-1001336-01, July 20 - Page 276
Adding devices (members) to a zone, Connect to the switch and log in as admin.
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
11 Zone creation and maintenance The cfgSave command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. Example switch:admin> zonecreate "greenzone", "2,32; 2,33; 2,34; 4,4" switch:admin> zonecreate "bluezone", "21:00:00:20:37:0c:66:23; 4,3" switch:admin> zonecreate "broadcast", "1,2; 2,33; 2,34" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y Adding devices (members) to a zone 1. Connect to the switch and log in as admin. 2. Enter the zoneAdd command, using the following syntax: zoneadd "zonename", "member[; member...]" 3. Enter the cfgSave command to save the change to the defined configuration. The cfgSave command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. Example switch:admin> zoneadd "greenzone", "1,2" switch:admin> zoneadd "bluezone", "21:00:00:20:37:0c:72:51" switch:admin> zoneadd "broadcast", "1,3" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y Removing devices (members) from a zone 1. Connect to the switch and log in as admin. 2. Enter the zoneRemove command, using the following syntax: zoneremove "zonename", "member[; member...]" 3. Enter the cfgSave command to save the change to the defined configuration. The cfgSave command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. 234 Fabric OS Administrator's Guide 53-1001336-01