HP 8 G2 Tablet - 1411 HP 8 G21411 Tablet - Maintenance and Service Guide - Page 24
Rear-facing webcam, disconnect the rear-facing webcam cable from the system board.
View all HP 8 G2 Tablet - 1411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Rear-facing webcam Description 2.0-MP, fixed-focus, rear-facing webcam (includes cable) Spare part number 773139-001 Before removing the rear-facing webcam, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 12). 5. Disconnect the battery cable from the system board (see Battery on page 14). Remove the rear-facing webcam: 1. Release the ZIF connector (1) to which the rear-facing webcam cable is attached, and then disconnect the rear-facing webcam cable from the system board. 2. Release the rear-facing webcam (2) from the molding built into the display panel assembly. 3. Remove the rear-facing webcam and cable. Reverse this procedure to install the rear-facing webcam. 18 Chapter 5 Removal and replacement procedures