HP 8 G2 Tablet - 1411 HP 8 G21411 Tablet - Maintenance and Service Guide - Page 25

Speakers, from the system board speaker connectors.

Get HP 8 G2 Tablet - 1411 PDF manuals and user guides View all HP 8 G2 Tablet - 1411 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Speakers Description Speaker Kit (includes top and bottom speakers and cables) Spare part number 785179-001 Before removing the speakers, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 12). 5. Disconnect the battery cable from the system board (see Battery on page 14). Remove the speakers: 1. Unsolder the speaker cables (1) from the system board speaker connectors. NOTE: When installing the speakers, the red speaker cables should be soldered to the system board "positive" terminals. The black speaker cables should be soldered to the system board "negative" terminals. 2. Release the speaker cables (2) from the clips built into the display panel assembly. Speakers 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
Speakers
Description
Spare part number
Speaker Kit (includes top and bottom speakers and cables)
785179-001
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
12
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
14
).
Remove the speakers:
1.
Unsolder the speaker cables
(1)
from the system board speaker connectors.
NOTE:
When installing the speakers, the red speaker cables should be soldered to the system
board “positive” terminals. The black speaker cables should be soldered to the system board
“negative” terminals.
2.
Release the speaker cables
(2)
from the clips built into the display panel assembly.
Speakers
19