HP 8000 Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 93
Appendix A: Error Messages and Codes, A.1 Introduction, A.2 Beep/Power LED Codes
UPC - 884420665106
View all HP 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
A Error Messages and Codes A.1 Introduction This appendix lists the error codes and a brief description of the probable cause of the error. ✎ Errors listed in this appendix are applicable only for systems running HP/Compaq BIOS. Not all errors listed in this appendix may be applicable to a particular system model and/or configuration. A.2 Beep/Power LED Codes ✎ Beep and Power LED indictions listed in Table A-1 apply only to HP-branded models. Table A-1. Beep/Power LED Codes Beeps Power LED Probable Cause 2 beeps Blinks red 2 times @ 1 Hz Processor thermal shut down. Check air flow, fan operation, and CPU heatsink 3 beeps Blinks red 3 times @ 1 Hz Processor not installed. Install or reseat CPU. 4 beeps Blinks red 4 times @ 1 Hz Power failure (power supply is overloaded). Check storage devices, expansion cards and/or system board (CPU power connector P3). 5 beeps Blinks red 5 times @ 1 Hz Pre-video memory error. Incompatible or incorrectly seated DIMM. 6 beeps Blinks red 6 times @ 1 Hz Pre-video graphics error. On system with integrated graphics, check/replace system board. On system with graphics card, check/replace graphics card. 7 beeps Blinks red 7 times @ 1 Hz PCA failure. Check/replace system board. 8 beeps Blinks red 8 times @ 1 Hz Invalid ROM (checksum error). Reflash ROM using CD or replace system board. 9 beeps Blinks red 9 times @ 1 Hz System powers on but fails to boot. Check power supply, CPU, system board. 10 beeps Blinks red 10 times @ 1 Hz Bad option card. NOTE: Audible indications occur only for the first five cycles of the error indication. Visual indications occur indefinitely until power is removed or until error is corrected. Technical Reference Guide www.hp.com A-1