HP 8050 Service Manual - Page 189

Retrofit tags ● Introduction ● Retrofit tag installation, placement, and orientation ● Retrofit tag descriptions Introduction NOTE: For information about removal of case parts to gain access to some retrofit tag locations, see Covers on page 204. Retrofit tag labels provide information about modifications that have been made to the HP 8050/8060 MFP and accessories. Labels are attached to a frame or non-removable section of the device or accessory. Retrofit tag labels can be used to identify the differences between noninterchangeable parts, diagnostic procedures, repair and replace procedures, and adjustment procedures. Field notes or bulletins will have a unique retrofit tag label number assigned to them to identify modifications required for a specific device configuration. When a modification to the device or accessories is completed, the unique retrofit tag label number is marked out on the retrofit tag. Check the retrofit tag label to identify modification made to a specific HP 8050/8060 MFP or accessory. Figure 4-2 Retrofit tag label example Component CM8050/8060 MFP ADF Scanner HP multifunction finisher HP 4000-sheet input tray HP 4-bin job separator HP single output bin HP analog fax accessory ENWW HP Service part number C5958A/5957A C5962A C5956-60079 C5959A C5961A C5964A C5963A C5954A Retrofit tags 123