HP 9040dn HP LaserJet 9040/9050 - User Guide - Page 179
Options, Values, Explanation, Independent Service Provider ISP for the proxy
UPC - 829160792941
View all HP 9040dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Item TCP/IP IPX/SPX APPLETALK DLC/LLC SECURE WEB Options Values DEFAULT IP AUTO IP LEGACY PRIMARY DNS SECONDARY . DNS PROXY SERVER PROXY PORT ENABLE ON OFF FRAME TYPE AUTO EN_8023 EN_II EN_8022 EN_SNAP ENABLE ON OFF ENABLE HTTPS REQUIRED HTTPS OPTIONAL Explanation A link-local IP address 169.254.x.x will be set. The address 192.0.0.192 will be set, consistent with older Jetdirect products. Specify the IP address (n.n.n.n) of the Primary Domain Name System (DNS) Server. Specify the IP address (n.n.n.n) of the Secondary Domain Name System (DNS) Server. Specifies the proxy server to be used by embedded applications in your printer. A proxy server is typically used by network clients for Internet access. It caches Web pages, and provides a degree of Internet security, for those clients. To specify a proxy server, enter its IP address or fully-qualified domain name. The name can be up to 64 characters. For some networks, you may need to contact your Independent Service Provider (ISP) for the proxy server address. Enter the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be a value from 0 to 65535. Enable the IPX/SPX protocol. Disable the IPX/SPX protocol. Selects the frame type setting for your network. AUTO (default) Automatically sets and limits the frame type to the first one detected. Frame type selections for Ethernet networks. Enable or disable the AppleTalk protocol. Enable or disable the DLC/LLC protocol. For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. Access using either HTTP or HTTPS permitted. ENWW Configure device menu 177