HP 9040dn HP LaserJet 9040/9050 - User Guide - Page 180
Rtt Min, Ping
UPC - 829160792941
View all HP 9040dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Item DIAGNOSTICS Options Values Explanation LOOPBACK YES TEST NO PING TEST DEST IP PACKET SIZE TIMEOUT COUNT PRINT RESULTS EXECUTE PING RESULTS PACKETS SENT PACKETS RECEIVED CAUTION This test will erase your TCP/IP configuration. YES the loopback test will be initiated. NO the loopback test will not be initiated. Specify the IP address of the remote host. A valid IP address must be entered. Specify the size of each packet, in bytes, to be sent to the remote host. The minimum is 64 (default) and the maximum is 2048. Specify the length of time, in seconds, to wait for a response from the remote host. The default is 1 and the maximum is 100. Specify the number of pint test packets to send for this test. Select a value from 1 to 100. To configure the test to run continuously, select 0. If the ping test was not set for continuous operation, you can choose to print the test results. YES to print results, NO to skip. Specify whether to initiate the ping test. Select YES to initiate, NO to skip. Determines the number of packets (0-65535) sent to the remote host since the most recent test was initiated or completed. Displays the number of packets (0-65535) received from the remote host since the most recent test was initiated or completed. PERCENT LOST RTT MIN RTT MAX RTT AVE PING IN PROGRESS REFRESH Displays the percent of ping test packets that wee sent with no response from the remote host since the most recent test was initiated or completed. Displays the minimum detected round-trip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. Displays the maximum detected RTT, from 0 to 4096 milliseconds, for packet transmission and response. Displays the average detected RTT, from 0 to 4096 milliseconds, for packet transmission and response. Displays whether or not a ping test is in progress. YES indicates a test in progress, NO indicates that a test completed or was not run. Updates the ping test data with current results. 178 Appendix B Control-panel menus ENWW